Print in place Small EDC box with magnetic lid.

Note, the version in the file is without a logo/symbol.

Requires two 8x3mm magnets.

If you want a single colour print, just right right-click on the model in the slicer and select your filament and it will all be one colour.

I wanted a small EDC box for my earplugs, and I could not really find anything that I wanted, so I decided to make a one myself, but it can obviously also be used for other small things.

I wanted something that fit easily in a pocket, and that did not use any sort of locking mechanism that would wear out over time, so I decided to use two 8x3mm magnets as a way to keep it closed. (link to Bambu  included in the BoM, or source locally)

Not only that, but I also wanted it to be printable without supports and much fuss, so I decided to make it print in place, so besides the two magnets, no extra hardware is used for hinges and such.

The magnets should be press fit, but you can always secure them with a drop of superglue if you find them not staying in.

If you find the press fit too tight, let me know, and I will make adjustments, but it fits perfectly on my printer.