Table clamp with hooks for screwing onto panels

Jogi's Table Clamp with Hooks
For screwing onto tabletops, shelves, and much more.

Suitable for standard board thicknesses from 18mm to 42mm.

Four distinct models to choose from:
Hook length 40mm or 25mm (interior approximately 35mm or 20mm respectively)

Each clamp is available in a narrow (26mm) and wide (40mm) version.

Select your desired clamp and delete the rest, then create the required number of copies.
Each clamp requires one screw.
You can print everything together on one plate, but the screws will look better if printed individually—your choice :-)

Important: Three wall lines or more, 20% infill or more, to ensure sufficient clamp stability.
Choose a robust infill (honeycomb structure is preset).

I have printed the hooks on my X1 Carbon and the A1.
With Bambulab PLA and PETG-HF, I achieve flawless results.


Application:
Attach the hook to the plate, insert the screws, and tighten.
As always: It's only plastic!
Do not overtighten; it's not a metal clamp!

Ideal for hanging bags, cables, headphones—anything you want or need to hang.
Suitable for the office, kitchen, workshop, etc.
PLA can be used indoors. For outdoor use, employ PETG, ABS, or other durable materials.

The contact surface features a profile.
For delicate surfaces, I recommend using felt adhesive for both the contact surface and the screw.

The narrow clamp holds more than 2kg (see photo); the wide clamp also handles a 5kg bag/backpack without issue.
It likely supports significantly more weight.

Need a different screw length?
https://makerworld.com/en/models/1485165-jogis-schrauben-m14-25mm-50mm-lange#profileId-1551550