Heimdallr

cover

20250427_211304.jpg

20250427_211749.jpg

Screenshot 2025-04-29 182752.png

20250427_211823.jpg

20250427_211517.jpg

20250427_211401.jpg

20250427_212034_1.gif

plate_1.png

2025-04-29_bc68c2260d5428.gif

Screenshot 2025-04-29 215422.png

Thank you everyone for the feedback! I have redesigned the latch on this print to increase its strength. I unfortunately had to split it up into two parts in order the get the layer lines in the correct orientation without having to add unwanted supports.  &nbsp;Magpul MOE grip insert for 2- 2032 batteries and 1- 123A battery for lights and optics. <ul><li>.2 layer height </li><li>15% Gyroid infill</li><li>Tree Slim supports </li><li>printed in black with white lettering </li><li>Filiment: SUNLU PLA+ 2.0 </li></ul>The bottom of the grip is labeled just to keep with the theme of the Magpul inserts. &nbsp;On the lid, I used a #7 O-ring ( O.D: ½&#34; , Thickness: 1/16&#34;) to help with retention and keep the dust and debris out. &nbsp;The bottom of the grip is labeled just to keep with the theme of the Magpul inserts. &nbsp;When inserting the tab into place, some force is needed to get it to seat all the way. I used a flat table top to help with getting it fully inserted. Once the tab is inserted it is locked into place with the portion that help to push the 2032 batteries out.

UPDATED tab for improved strength 

This design is for the Magpul MOE style grips. It holds one 123A battery and two CR2032 batteries. The CR2032 batteries are held in by the small lip in front of them and are removed by pressing on the retainer clip in the back. &nbsp;On the lid, I used a #7 O-ring ( O.D: ½&#34; , Thickness: 1/16&#34;) to help with retention and keep the dust and debris out. &nbsp;So far I have printed it in PLA and it has been working great. The tolerances on the lips that engage with the grip are on the tighter side but I figure they will wear in with use. &nbsp;The bottom of the grip is labeled just to keep with the theme of the Magpul inserts. &nbsp;&nbsp;&nbsp;<boostme><boosttitle>Boost Me</boosttitle></boostme>&nbsp;

Magpul Grip insert cr2032 and 123A

ASIA

Print Profile(1)

Bill of Materials

Description

Comment & Rating (10)

License

Related Models