Search models, users, collections, and posts
Latch Slide lock (open closed position lock mechanism)
IP Report
Print Profile(2)
0.24mm layer, 4 walls, 20% infill, higher temp and less airflow to increase layers strenght
Designer
1.4 h
1 plate
Glue version of other profile
Designer
1.4 h
1 plate
Open in Bambu Studio
Boost
156
411
46
9
755
306
Released
Description
Reliable and strong Latch Slide Lock created using a compliant mechanism.
You can choose between wall-mounting with screws or adhesive like glue and between three different aesthetic “Pin” options.
Printing tips:
The "Slider" component is recommended to be 3D printed with rigid materials like PLA, while other parts can be printed with PLA, PETG, or similar materials.
The mechanism operates smoothly and decisely even without lubricants, however if desired, i reccomend not to use WD40 as it may increase friction with PLA polimer.
Assembly tips:
It is very difficult to remove the “pin” once inserted, so insert it when everything is yet mounted in place.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (46)