Apex Legends R99 - Cosplay Prop Replica
Print Profile(1)
Description
Finally available on Makerworld!
One of my all-time most downloaded models – the legendary R99 from Apex Legends – is now ready for you to print easier than ever.
Boost Me (for free)
Support me by boosting this model. :)
The model is split into several parts to fit on smaller 3D printers with a minimum build volume of 25 x 21 x 21 cm (9.84 x 8.3 x 8.3 in).
All parts are already oriented for optimal printing with minimal supports – just slice and print!
Good news: You can complete the entire print in under 24 hours and with less than 1 kg of filament, depending on your slicer settings.
For the assembly, I recommend using two 6 mm rods, each 215 mm long, to connect the parts easily and securely.
The assembly instructions are available as a separate download in the file section.
If you have any questions, feel free to reach out!
You can also check out a full detailed build video right here: YouTube
Please note: This is a completely static prop – not a working rifle - handle with care!
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)