Mini Flowers - Not Your Grandma's Flower Pot

🌸 Mini Pot? Mini Plants! (But not quite what you'd expect...) 🌸

Update 1 2025.04.30 - Had to make some slight adjustments to the supports after migrating to a newer BambuStudio Version.

Update 2 2025.05.01 - Added slighty rearranged profile for Bambu A1

What started with a simple mini flower pot test print for my new terracotta filament 

has completely escalated: Instead of a boring, empty pot, there's now a whole set of 

mini plants – with character! Here, you won’t find classic roses or tulips – but a 

collection of tiny, cute “flowers”:

• A heart for romantics 💖
• A star for fans of jumping plumbers ⭐
• A single finger 🖕
• A smiley for good vibes 🙂
• An eye that might be staring at you just a little too critically 👁️
• A printed poop emoji, luckily without odor 💩
• A skull for the morbid ones among us 💀
• An earbutt, because who didn't always want a butt with ears? 👂🍑👂
• A cornuta for metal fans 🤘

Note: Some of the more extravagant little plants (keyword: 🍆 and 🍒) are in a separate

upload in the NSFW section.
 

Some of the “flowers” were made by me, others were taken from various sources

on the web, resized, fitted with holes to put on the leafy stems and/or adjusted in 

other ways - All done in Tinkercad. See the attribution list at the end to find out about
their original designers and links to their work.

🖨️ Printing Tips:

• Super quick to print – the plants are tiny and need hardly any support material.
• Ideal for filament scraps or Bambulab AMS chaos with colorful filaments. 
• Perfect as desk decor, troll gifts, or simply because you can.
• Perfect as gift for friends or pranks in the office.
• Easy to assemble. Just a few drops of superglue necessary.

⚠️ Attention - Read carefully ⚠️

1. To avoid having to upload many different print profiles, I put all of the "flowers" on ONE buildplate. If you own three AMS and/or want to print all at once, you can print the 3rd buildplate as it is after setting the correct filament colors. If you own only 1 AMS or you just want to print one or two of the flowers, create a new buildplate and move the “flowers” you want to print on it.

    

2. Because I used a lot of colours for the different models, don't forget to set the right colours before printing.

    

3. Some of the models are very delicate and prone to bed-adhesion issues if your buildplate isn't cleaned properly. Brims and supports have been added where necessary.

    

4. The stems with leaves print with supports. Be very careful when removing the supports or you might break off the leaves. Best way to remove them is cutting the brim apart, holding a leaf in one hand and carefully wiggling to remove the support.

    

5. I suggest using superglue or any other adhesive to stick the “soil” and pots together. The stem and the “flowers” should be a press fit and are possibly interchangeable but should also be glued if you want them permanently.

    

6. Depending on how well your filament is calibrated or what printer you use, the stems might suffer from "elephant's foot" on the bottom and don't really fit inside the hole of the “soil”. In that case, either heat them up with a lighter shortly and squish them gently to reduce the diameter a little or use a bit of sandpaper.

    

7. On buildplate 8 is an optional weight for the bigger “flowers” as they could topple over, especially when using the large optional flowers on buildplate 9.

    

8. If you want to use the optional flowers on buildplate 9 I'd suggest printing the stems on buildplate 10, as the distance from the upper leaf to the top is too short.

    

9. The containers are for transportation or as a gift box. Don't forget to pick the correct size according to the printed “flower”. Transparent filament looks best for them.

    

10. When trying to print the containers, you can ignore the warning about floating regions. They print fine.

Attribution list for remixed models: