Cap for rear suspension of the Segway MAX G3

==============================

USE AT YOUR OWN RISK. I TAKE NO RESPONSIBILITY IF YOU BREAK SOMETHING OR IF IT DOESN'T FIT YOUR E-SCOOTER SUSPENSION. DO NOT USE FORCE. I REPEAT. DO NOT USE FORCE.

==============================

I saw some complaints about rust, so I made this based on the 3mm Allen key coming with the scooter.

The 3D object is a 3.2mm polygon with a height of 3mm sitting on a 6mm circle with a height of 1mm.

I printed this in black PLA. TPU should be better though. If I had TPU lying around, I would use the TPU

It fits the calibration holes on my 2025 Segway MAX G3 E suspension like a glove

You should not use force if it doesn't fit, as this will make calibration of your rear suspension harder or impossible in the future

Use at your own risk.

==============================

USE AT YOUR OWN RISK. I TAKE NO RESPONSIBILITY IF YOU BREAK SOMETHING OR IF IT DOESN'T FIT YOUR E-SCOOTER SUSPENSION. DO NOT USE FORCE. I REPEAT. DO NOT USE FORCE.

==============================