Jerkbait Tiger-Bobby Pike Lure

Super Jerkbait lure for Pike or Perch fishing

Whether floating, suspending or sinking, it has a very tight swimming action. It animates very well with a twitch or jerk.

Follow the assembly instructions to achieve the desired result.

Instructions and information :

Materials : I have conducted 10Kg resistance tests on PLA and PETG which pass without problem, I question the durability of PLA but for the moment no problem.

Lure version :

• You can edit the colors of the “Zebras”, gills and eyes
• It can be floating, suspending or sinking, simply adapt the weight to the 100% scale. Weight explained below in the instructions. (Caution if you modify the scale (> or < 100%) you modify the volume and therefore the density, the weight information will no longer be valid)

• Between 15g and 16g, it is perfectly suited to M and MH rods.

   

Materials :

• Hook attachment ring

  • Reference 8 KR-28
  • Dimensions

  •  

    

  • https://fr.aliexpress.com/item/1005005131879277.html?spm=a2g0o.order_list.order_list_main.59.2faa5e5bWbWwGG&gatewayAdapt=glo2fra

     

• Steel or lead balls

  • Maximum 6.5mm diameter
  • https://fr.aliexpress.com/item/1005006776214313.html?spm=a2g0o.order_list.order_list_main.39.2faa5e5bWbWwGG&gatewayAdapt=glo2fra

   

• 6mm Stainless Steel Split Rings

  • Amazon link here

     

• Eyes

  • https://fr.aliexpress.com/item/1005005252876542.html?spm=a2g0o.order_list.order_list_main.39.1f0d5e5bJKQ3IZ&gatewayAdapt=glo2fra

   

• Number 4 treble hooks

  • Amazon link here

     

• Epoxy Resin

  • Link here

   

Assembly instructions :

Important for lure balance : I advise you to weigh all the elements before assembly! (Lure, hook, attachment, rings…) The weight of the body may change depending on the filament for example but not the volume!

• For a floating lure you must be below 15g
• For a suspending lure close to 15.5g
• For a sinking lure above 16g

Add the internal elements :

• Place gently, without pushing the fasteners too hard
• Arrange the weights (preferably 20% heavier at the front)

• 

Assemble the body :

• Coat the entire other side with super glue and assemble (wear gloves! please, not like me…)
• Adjust the alignment of the fasteners, they must be perfectly aligned!
• Tighten everything with two clamps (you can print some here if needed)

• 

• 

• 

Finalization :

• Add a drop of epoxy resin to ensure watertightness
• Glue the eyes (with glue)
• Mount the rings and hooks
• Put down the computer and go fishing ;-)

I hope you enjoy it ;-)