Customizable Cable Zip Tie Mount

Customizable IKEA Skadis compatibile board.

With this parameterizable model, you can generate original (blue), i.e. thick edge, or classifiable (pink), i.e. side-by-side, Skandis plates. The program automatically calculates its physical dimensions, you only need to enter the number of holes in the X and Y directions.

You can set the folowing parameters:
main_thickness
main_width
main_length
corner_radius

main_hole_diameter
for countersunk head screws, set the larger diameter, for non-countersunk screws, set it to the same as hole_dia:
hole_dia_screw_head
hole_screw_heigth

zip_tie_thickness
zip_tie_width
zip_tie_top_thickness
zip_tie_cut_correction

Resolution of circle:
fn = 64 (recommend 64)

Use a very clean plate because the adhesion will not be adequate and I recommend using a plate with good adhesion such as textured PEI or PEI plate.

My modells: my modells.

My Customizable modells: click

If you are satisfied with my work, please, in addition to downloading the model, printing and evaluating it, you can also support it with boost.

Print, use and enjoy!