Visitenkartenhalter - Free 3D Print Model

Search models, users, collections, and posts

3D - Druck & Design

Household>Office

IP Report

Print Profile(1)

All

H2D

X1 Carbon

X1E

H2S

P1S

X2D

H2C

H2D Pro

P1P

A1 mini

P2S

0.12mm layer, 2 walls, 15% infill

Designer

10.4 h

2 plates

4.7(77)

Open in Bambu Studio

Boost

1174

2981

2.4 k

979

Released

Description

Content has been automatically translated.

Show original

Having expanded my presence in the 3D printing business, I needed an elegant business card holder.

Inspired by a similar, yet suboptimal design, I developed this model (optimized for cards measuring 55 x 85 mm).

The base is more refined and stylistically consistent with the upper section. Moreover, the cards are displayed at a 45° angle, enhancing their visual appeal.

Tip: Printing in two contrasting colors creates a truly sophisticated impression…

Happy printing…

Comment & Rating (96)

@user_2647189757

Print Profile

0.12mm layer, 2 walls, 15% infill

In PETG unfortunately many defects

The profile uploader has replied

Show original

@3D_Druck_Design

Hi, that looks "interesting" 😉. I would guess it's related to cooling, as it managed the overhang quite well in parts. Try placing it closer to the cooler (perpendicular to the airflow, so that it catches both slopes well) and possibly leave the door open

(Edited)

Show original

@user_2647189757

Thank you, I'll try that right away. It looks so great in the pictures 😊

(Edited)

Show original

@JaredC

Print Profile

0.12mm layer, 2 walls, 15% infill

love it

The profile uploader has replied

@3D_Druck_Design

cool coloring ;-)

@Schubeat

Print Profile

0.12mm layer, 2 walls, 15% infill

Great print. Excellent design. Printed entirely in black and painted it myself. Thanks

Show original

@ShadowsNdust457

Print Profile

0.12mm layer, 2 walls, 15% infill

Bed Adhesion Issue:I’m not trying to hurt anyone’s feelings or disrespect anyone’s work. I truly like this design because it’s unique! It’s angled approach and the honeycomb effect makes it look most appealing! The slicing of dual colored filament is an issue that I had to learn about the hard way. 19 hours is a long time for any project! It was knocked loose at 10% or less(510/596). I’m happy it printed out that far enough to use. Dual color is in my opinion, the best quality, but in truth; it is a waste! both in time and filament. I think the future of 3d printing will need to rethink the dual color scheme. Thank you for sharing your design!

The profile uploader has replied

@3D_Druck_Design

Hello, you are very welcome However with this object the contact surface to the plate is very large so bed adhesion problems are not due to the design or the profile As a tip I recommend thoroughly cleaning the print plate once with warm water and dish soap Afterward do not touch it with your fingers as that leaves greasy spots Then it should adhere without problems And yes printing two colors without H2D unfortunately takes a very long time ;-(

(Edited)

Show original

@Kirk2626

I said the same thing in my comment and it got reported and removed. I guess we have to always just say perfect print. I didn’t say nothing bad cool design still. I just said something about the color switch time

(Edited)

@ShadowsNdust457

Replying to @Kirk2626 :

i know right?! but I don’t care because I’m a retired soldier who has been in combat for many years and now I have a great excuse to be honest and not care what anyone else says or thinks!

(Edited)

@Druckdeinding

Print Profile

0.12mm layer, 2 walls, 15% infill

Very satisfied, had a small setting problem briefly, but it was my own fault 😂 Thanks for the design 👍🏼

Show original

@cesarpr

I love the design, but 11 hours wow, and to top it off, a lot of filament went into the poops. But I repeat, the design is incredible

Show original

@Prisillywilly

This was my first print and it was easy and fast

@mwservice3d

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

Klasse Arbeit

@user_2936185342

Print Profile

0.12mm layer, 2 walls, 15% infill

I made this business card holder for my husband and both he and his colleagues liked it very much thanks

Show original

@user_3091953446

Print Profile

0.12mm layer, 2 walls, 15% infill

Other Issues:let this print while I was asleep and well this is what I got

The profile uploader has replied

@3D_Druck_Design

Hi, but I can't do anything about poor print bed adhesion, can I?!? The contact surface is quite large with this model. I recommend thorough cleaning, possibly spray adhesive on the print plate

(Edited)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Visitenkartenhalter

HE3D

532

257

358