NCASE M2 Minimal Case Feet - Various Height

I made a set of case feets that's compatible with most NCASE M2 variant.

There's 2 version of this set, the long O shape (Type A), the U shaped (Type B) and the long O shape with IO for the M2 Split/Grater version.

Both version comes in 2 height variants: 15mm and 25mm

All version uses M3 screws and does not block the bottom panel's screw holes.

Before printing, I recommend printing the test file to make sure the screw hole matches your final print. You can use it as a baseline to scale your model for filament shrinkage compensation

No support needed

You will need a M3 x 4 x 5 for the 15mm or M3 x 5.7 x 4.6 inserts for the 25mm insert version. There's also a regular version incase you don't use inserts like I did.

Model in the picture printed using Overture ASA (adjusting additional 0.65% for shrinkage)
Print setting: 0.2mm layer height, 3 walls, 15% gyroid infill on a Bambu P1S w/ 0.4mm nozzle