Search models, users, collections, and posts
Bracket for Element Shelving System
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
10.9 h
5 plates
Open in Bambu Studio
Boost
7
27
0
0
19
13
Released
Description
Summary:
This is a bracket that can be attached to the bottom of the shelves of element shelving systems (see images for an example). The bracket prevents the shelves from sliding left to right. Tolerances are chosen very loosely to fit systems from various manufacturers.
The shelving is rock solid after installing these things!
Materials for one bracket:
- approx. 3 g filament
- two 3.0x12 screws (i.e. a screw with roughly a diameter of 3 mm and short enough to not penetrate your shelf on the upper side)
____________________________________
How to customize parametric models: https://youtu.be/tTxtUKSM08c?si=AF2WSzBWkKsjiaGA&t=368
Boost Me (for free)
If you liked this model, boost to support the development of more things! Follow, if you want to see more of my designs! 🔥🛠️💡
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (0)