Print Profile(1)
Description
Since I also print with resin and don't have a suitable small waste garbage can at my place,
I created this container which can be screwed under the desk.
It consists of 2 parts for the pull-out frame,
one guide each for the right and left which are screwed under the desk and the waste garbage can.
As the pull-out frame does not fit on the printer as a whole,
it consists of 2 parts which are glued together.
The frame is designed so that it can only be glued together correctly (2 lugs and a radius on the top edge determine the position).
When everything is assembled,
you can push the frame into the guide from the rear and insert the container from above.
2 stoppers at the rear prevent the frame from being pulled out completely to the front.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (40)