4U 10 inch rack for Synology DS920+/DS925+ - Free 3D Print Model

Search models, users, collections, and posts

DesignBot

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P2S

P1P

H2S

X1 Carbon

H2C

H2D

X1E

H2D Pro

X2D

A2L

0.2mm layer, 4 walls, 50% infill

Designer

23.2 h

2 plates

5.0(14)

Open in Bambu Studio

Boost

294

315

122

Released

Bill of Materials

Bambu Filaments

Select all

ABS

List other parts

M4×8 screws x 8:
heat-set threaded inserts (M4×5.5×6) x 8:
8 metal washers (M4×9×0.8) x 8:

Description

This is a rack mount I designed for the Synology DS920+.

To ensure strength, I made it a sliding structure, secured through the front and rear panel screw holes of the rack.

You’ll need some heat-set threaded inserts, M4 screws, and washers to assemble it.You will need a total of 8 heat-set threaded inserts (M4×5.5×6), 8 M4×8 screws, and 8 metal washers (M4×9×0.8).

Boost Me (for free)

Comment & Rating (24)

@sflabbe

Thanks for the design. I had to modify the back plate for this 3d printed rack.

The designer has replied

@DesignBot_US

That's so cool

@Littleferris3d

did you modify it for the standard sized labrax or is yours custom sized?

@npierre1990

can you share this remix ?

@sudosamurai

So.. would this also fit a DS925+? I assume it does as the 925 is a upgrade from the 920 but any confirmation would nice ;) Aaaaand i should have Googled this first. But here's the answer: The Synology DS920+ and DS925+ are the same physical size, both measuring approximately 166×199×223166 cross 199 cross 223166×199×223 mm. The primary difference is that the DS925+ is a newer model that replaces the older DS920+.

(Edited)

The designer has replied

@DesignBot_US

Yes, I think they didn't change the size. I'll change the title to "4U 10 inch rack for Synology DS920+/925+"

@chmalu

Boosted

Print Profile

0.2mm layer, 4 walls, 50% infill

good one. if you press inserts from inside it work a little better and you can accommodate longer screws. I recommend using one size larger washers. the place for bolt itself could be tighter for more clamping surface.