Magnetic Toolbox Organization Labels - Free 3D Print Model

Search models, users, collections, and posts

Mariiiii

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

P1P

H2D

X1E

H2D Pro

X1 Carbon

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

10.3 h

3 plates

5.0(12)

Open in Bambu Studio

Boost

123

454

375

129

Released

Bill of Materials

Bambu Filaments

Select all

ABS

ABS

Description

These are simple toolbox labels with magnet holes on the back for applying to your toolbox. These are smaller than some of the others I see out there. I preferred the smaller labels and didn't really care for the giant ones. ***EDIT: I added a second profile that has several more labels. Please let me know if you have any word requests and I can add them!*** The font is a very close match to the US General boxes from Harbor Freight. The magnets used are the Rare Earth Magnets from Harbor Freight here: https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html I did use a dab of glue to keep the magnets in place, otherwise they wanted to stay with the toolbox despite a tight fit.

I used ABS to print these as I'm in the Florida heat without an insulated garage. The Bambu Labs ABS Orange matches the US General orange toolboxes perfectly.

Comment & Rating (43)

@G00se8

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out great! Love these things! not sure if you could do a customize tab or not but that would be helpful too!

The profile uploader has replied

@Mariiiii

I can do a blank one in each of the various sizes so you can add your own text. Unfortunately, Bambu doesn’t support the font used (Falcon Punch) so it’ll revert to a basic font. However, if you don’t care about that then I can make it happen!

@Mariiiii

That or tell me which words you’d like and I’ll add them in this same font!

@G00se8

Boosted

oh ok awesome! I will let you know! I still have a ton to make! Thanks!

(Edited)

@jhedrikk27

I absolutely love mine great idea works fantastic

The designer has replied

@Mariiiii

Your box looks awesome! I’m glad you like the file. Let me know if you’d like any additional words added!

@jhedrikk27

Replying to @Mariiiii :

can you make one for speakers, I do a lot of work with speakers and I have a whole drawer only for speakers, wiring and everything

@steve38544

Print Profile

0.2mm layer, 2 walls, 15% infill

came out great.

The profile uploader has replied

@Mariiiii

Nice! The blue on black looks good!

@Stoney25

Is it me or are some of them missing the holes ?

The designer has replied

@Mariiiii

I just checked on this and saw the same thing. However, the holes are there. Please disable supports and slice the file then look at the lower layers and you'll see them there. I uploaded the file without supports but I believe a recent update with Bambu caused the change.

@Dennoberry

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice clean print, the lettering turned out great. This was one of my huge “wants” when i started printing and I’m very happy w this print! They will look great once I add the magnets and put them up :)

@user_3707302318

could you add a label that says 3/8, 1/2 and 3/4 I would like to add these to my draws to designate which draw has what size sockets/ratchets in it

(Edited)

The designer has replied

@Mariiiii

Hi there, I'm sorry you're having problems. I just tested the file on two different computers and the phone app and all 3 plates show up for me in the Bambu software. Please try downloading the file again. I hope you enjoy the magnetic labels.

@user_3707302318

Replying to @Mariiiii :

I had to open them in bambu slicer to get all 3 to show up. could you add 4 labels 1/4 3/8 1/2 and 3/4? Would be nice to have to indicate what size ratchets/sockets are in which drawer! you rock!

@user_3707302318

Replying to @user_3707302318 :

also one that says Loctite would be awesome!

@user_4272303556

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent print. These labels will stay on my tool boxes for the next generation of makers. Thank you for sharing your design. I couldnt match the font but my boring font will do. Ray

(Edited)

The profile uploader has replied

@Mariiiii

Thanks for the rating! Unfortunately, Bambu doesn’t support the font “Falcon Punch” so I create the text in Orca Slicer and then import to Bambu. However, I have a couple requests so I’ll make the requests and leave a blank one for you to add your own text (with directions). Hopefully by end of day Monday!

@user_4272303556

Boosted

Replying to @Mariiiii :

You are terrific. Thanks

@Stoney25

I did a test print, thankfully and now I have to wonder why my "CS" printed with no magnet holes on my A1

The designer has replied

@Mariiiii

@Stoney25

Replying to @Mariiiii :

Supports were off

@user_1620518357

I'm loving the style of these labels! I'm wondering, are you able to add letters so I can customize my own labels? A-Z would be fine and I can copy and paste where I need them, or would you be willing to make some of the ones I need? Again, great work on the labes! I have a lengthy list of ones I want, so by all means not trying to be a pain. hah

The designer has replied

@Mariiiii

Great idea! I'll try to find some time to do that. Otherwise, if you install the font Falcon Punch and put it in the font file for Bambu, it should work in the slicer!

@munizfire

Are you using Bambu orange in your pictures? I've been on a hunt for a matching orange for my US General Toolboxes, but haven't gotten anything close so far (including Bambu)

The designer has replied