Airgoo pottery wheel bat system - Free 3D Print Model

Search models, users, collections, and posts

Freylin

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

X1 Carbon

X1E

H2D

P1P

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10-15% infill

Designer

2.4 h

2 plates

4.5(4)

Open in Bambu Studio

Boost

217

109

Released

Description

Airgoo pottery wheel bat system

Can be fixed on Airgoo pottery wheel using only 4 small screws. Bats are securely in place. For first use, wipe down the bats with dirty clay water containing slip and dry them. Everything was printed on a textured plate using Bambu PLA. When attaching, first secure one block, then place the bat to determine ideal position of the second block. Secure the second block and then the system is ready to be used. The blocks are made of two pieces: the largest piece fits on the underside of the wheel and the small plate is put on top with the holes matching so it can be secured with screws.

Comment & Rating (9)

@user_1794530269

Print Profile

0.2mm layer, 2 walls, 10-15% infill

quick cool print. trying to build a pottery wheel but I’m not done yet so I can’t test this.

@user_2012549453

Looks like a great system, would love a version for the budget 25cm wheels all over amazon and other sites. Maybe bolts instead of screws too if they're being unscrewed and screwed often which i imagine would wear down after a while

@user_2864750650

hi, can you tell me what diameter it will fit?

(Edited)

@mdmstf

What is the diameter size in santimeters?

@kleio6976

Print Profile

0.2mm layer, 2 walls, 10-15% infill

Good idea but there is sth wrong with the screws!!

@laridinart

Hi I LOVED your solution would it be possible to create a version to be printed on a Bambulab A1 mini

Show original

@Tiptaptopal

Hello! I want to make this print for my 15cm/6inch wheel. Would you be open to resizing it to fit that? I scaled it to the right size, but the screw holes would be too small. Also, what size screws did you use? Thanks!

@toniuusimaki

Print Profile

0.2mm layer, 2 walls, 10-15% infill

@user_3665143056

Print Profile

0.2mm layer, 2 walls, 10-15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.