Soma Cube (large version)

This is a large Soma Cube and a matching box to store the pieces.
Can you solve the puzzle and place all pieces in the box?

If you want to solve more figures, take a look at the Pentoma website:

https://www.pentoma.de/soma-figuren-uebersicht/

Print preparation:
Make sure that your print bed is clean and grease-free and use a quality brand and dry filament. An AMS is not necessary, but makes like easier when printing all parts in different colours.

Print settings:
Use the 0.28mm settings. Three walls, five tops + four bottoms and 9% gyroid infill are recommended. 

This model can be printed on all Bambu Lab printers so far.
See my 3mf print profile for more details.

If you want to support me you can leave a tip at ko-fi.com/blecheimer.

Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0. The shown models must not be used commercially.
Copying these models to other 3D printing websites is not allowed without my permission.