Ten-inch Shelf TP-Link SG108 Plus Keystone - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Goul

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

P1P

X1E

P1S

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.8 h

1 plate

4.6(16)

Open in Bambu Studio

Boost

327

586

276

Released

Description

I wanted a keystone jack to allow me to route the uplink from the hub through the back of the rack.

So I've merged the keystone model by EODelf into the Remix of TP-Link SG108PE v2 Rack Mount model. This gives a keystone port on the right hand side of the switch that allows a jack to be mounted into the front plate.

Comment & Rating (26)

@Modulex

Print Profile

0.2mm layer, 2 walls, 15% infill

Great shelf

@robstev0

How did you get that texture on the front? Is it a stick-on?

(Edited)

@Modulex

Replying to @robstev0 :

I used 3D effect plate https://eu.store.bambulab.com/products/bambu-3d-effect-plate

(Edited)

@user_2749212038

What is the bottom shelf for, nas?

@MissD.Cat

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in PETG, also fits my LS108P POE with Velcro as the wall mounts are slightly different than sg108. Thanks for the model.

@ThrottleX3d

Print Profile

0.2mm layer, 2 walls, 15% infill

thanks was areally nice project

@riggsbie

Print Profile

0.2mm layer, 2 walls, 15% infill

poor position on the build plate, simply ritating 45 degrees would solve a failed print. shame the print profile isn’t good to go for p1s

The profile uploader has replied

@GoulGoul

Sorry to hear your print failed on your P1S. Was your issue a bed adhesion issue on the P1S? Or is it an issue with bed/machine sizing? I’ve an X1C, so that was the print profile uploaded.

@user_1122571429

Boosted

Just what I needed, thanks!

@Escobk2545

Boosted

thank you

@deear

Print Profile

0.2mm layer, 2 walls, 15% infill

not sure why, but it does not fit sg108pe… I had to heavily re do it, plus mount holes are not aligned to 10inch…

The profile uploader has replied

@GoulGoul

I found the mounting tight for my versions of the SG108 Plus, getting the keys into the base is fiddly. I note the original creator says : "Adaptation of the rack mount from Printables for a TP-Link SG108PE v2. I suspect the original creator used a different version, resulting in incompatible mounts (width, position) I use this in a self-printed 10-inch rack from Natalie T, available on Printables (https://www.printables.com/model/1090551-modular-10-inch-server-rack-reworked) ;The hooks (anchors) fit very snugly and were taken from the original. So don't be surprised if they are difficult to attach. However, it then sits very well and does not wobble" Maybe you have the original size? I sorry you are having issues with fitting it into a rack, I've mounted half a dozen or so into various LabRax racks (https://makerworld.com/en/models/1294480-lab-rax-10-server-rack-5u#profileId-1325352) Happy to link to the changes you've made in case anyone else has your size of switch.