8.5mm Wire Loom - Clamp Style

8.5mm Wire Loom, Clamp Style. These 8.5mm Looms have a 8.25mm Clamping area. Just enough to hold the wire tight but not to squish it. If you need a smaller or larger Clamp loom, reach out. I can easily make a new size and post them. If you are looking for a 8mm, check out my other model, I have it post here on maker world. 

The print profile is .2mm layer height. (You can do what ever lay height you want to do. But I do definitely recommend 100% infill)

2 to 4 walls

100% infill

This utilizes 3mm Hex Socket Head Cap Screws and Nuts. The design is built around holding the nut in place. 

you can find the set I bought on Amazon,

https://www.amazon.com/iExcell-Socket-Button-Screws-Washers/dp/B0811NDFNJ/ref=sr_1_4?crid=2702FA0W1XJM&dib=eyJ2IjoiMSJ9.bgCim--miPDNbv3npmtoNg76yjwZrH0XvcuSg1nRLQMvCh9f8TFsa35BjC61_dt7jf-S2rWZ9aDLm3ERwYANW8AUaTUQxKVISEbwCtDwzg2fysm1jiaX-LySq8aJZZohCXo12EPGcubryB2Fd1bb25oFcs7mGaAwUMQ8yih27en6awm30TkUCWMXCU91klhJyIgTJVB4uPwoYYtB6MmFJBIpz7bNJgfeC9_D9yJGR1M.kb7qzSzFmHP5lcMDEf4OwS33HMLvT2Dy5s5JHPla83M&dib_tag=se&keywords=iexcell%2Bm3%2B1500%2Bpiece%2Bset&qid=1745684026&sprefix=iexcell%2Bm3%2B1500%2Bpiece%2Bset%2Caps%2C114&sr=8-4&th=1