FRITZ!Box 7590 AX V1 Vertical Stand / Wall Mount - Free 3D Print Model

Search models, users, collections, and posts

mickdekkers

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

P1P

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% gyroid infill

Designer

3.5 h

1 plate

5.0(21)

Open in Bambu Studio

Boost

213

282

163

Released

Description

A holder for the FRITZ!Box 7590 AX router (V1) so it can stand vertically on a flat surface or be wall mounted vertically using three screws.

Features

Perfectly fits the rounded contours of the device (which prevent it from standing vertically on its own)
Raised walls mold snugly around the device prevent it from tilting or falling off
Can be wall mounted using the three integrated screw holes
All ports and buttons are accessible
All LEDs are visible
Prints without supports

Parts needed

3x M3 screws (only when wall mounting)
- Length depends on the thickness of the surface you're mounting it on. You need at least 5 mm to clear the mount, then some extra length for the wall (I'd suggest at least 1 cm). I used 16 mm screws myself.

Compatibility

This model is designed for the V1 revision of the router. Please check the back of your router for the SKU before printing.

SKU	Product	Compatibility
20002804	V1 international edition	Compatible
20002878	V1 Belgian edition	Likely compatible, unconfirmed
20002784	V1 German edition	Likely compatible, unconfirmed
20002999	V2 international edition	Not compatible

Other SKUs may or may not be compatible. Please let me know in the comments if you've tried the model with a different SKU so I can update the table for others. Thanks!

Tip jar

If you found this design helpful, please consider buying me a coffee - always appreciated!

Comment & Rating (27)

@Itero

Excellent print, unfortunately not suitable for the V2 version. Could you possibly adapt it to the other version and publish a new print profile? Regards Sebastian

The designer has replied

Show original

@mickdekkers

Hey, it seems you're right! For V2 I'd suggest giving this model a try instead: https://www.thingiverse.com/thing:5400474 That one didn't fit my router - which is the reason I created my own mount - but that means it might fit yours 😄 I'll update the model description to specify it's for V1 of the router, thanks for the feedback!

@Itero

I will try it in a few days, thank you very much and you're welcome! :)

Show original

@Itero

Replying to @mickdekkers :

Unfortunately, the one in the link isn't suitable either, the size was right, but I can't fully insert it Apparently there are several variations among the variations

Show original

@3ddruckxton

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

sehr gut

@user_3339967693

Boosted

Very practical stand for the FritzBox, flawless print, thank you very much for the model

Show original

@user_3339967693

Boosted

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Very practical model. I only printed the bottom part, I don't need the screw mounts. The FritzBox stands perfectly. This is much more practical for being able to reach the buttons and ports. Printing with PLA on a P1S worked great

Show original