AMS 1 / 2 Pro Dual Rack Stack - Fully 3D Printed
Print Profile(13)
Bill of Materials
- Bambu Bus Cable 6pin (AMS to AMS/Hub/Buffer) / 1500mm x 1:
Description
AMS 1 / AMS 2 PRO STACKER – FULLY 3D PRINTED
This minimalist yet functional design fits perfectly on a single Bambu Lab X1/P1 build plate, with no screws or additional parts required.
Easily attach one or two connection tubes with precision-engineered press-fit pins. The fit is tight, with a tolerance of just 0.15mm, so I recommend using a soft hammer for assembly. The pins are optional, as the parts hold securely on their own, but they add extra security if needed. Keep in mind, lower ams has to be pulled forward to open it!
Concerned about AMS cable protection? Included are two spacer blocks that push the AMS units forward, preventing cable strain and improving the stack’s visual balance for a cleaner, more organized setup.
Tested and optimized for both PETG and PLA filaments, ensuring reliable performance across a range of materials.
Recommended: apply a bit of Bambu Lab glue stick for better adhesion!
Recommended: Connect the AMS Cables to the uper AMS first and then link them to the lower AMS
WARNING: THIS MODEL IS NOT DESIGNED TO SIT ONTOP OF YOUR MASCHINE, This model is meant to stack AMS besides your printer as shown in the pictures, a AMS has the same width as printer so this rack will not fit ontop of your maschine, you also cannot pull the bottom one forward if it fitted. Some users have had succes placing it ontop of a H2 series but even there the additional weight of the double AMS will cause your maschine to shake a lot!
Changelog
-=-7-7-2026-=-
- ‘’AMS Rack Raiser'' was added, this unit raises the main AMS rack allowing you to acces the lower AMS without the need of pulling ot forward. This was made as a alternative for people with a 256mm buildplate that cant print the XXL Raised Version.
-=-30-6-2026-=-
- ‘’AMS 1 / AMS 2 Kit | XXL RAISED VERSION | H2 and A2L Series'' was Added, This a special version of the trusted AMS stand with longer legs making it able to open the lower ams without pulling it forward! In theorie this also makes it easyer to put ontop of a H2 series maschine but i still do not recommend this because of the violent shaking. So do at your own Risk! (Atleast use a bit of stick tape under the paws)
-=-Previous Changes-=-
- See comments for updates made before 30-6-2026
Need Support?
To help us assist you more effectively, please include which printer and filament you’re using, along with any modified settings. If a manual is available for your model, we recommend reading it and starting with the stock settings for best results.
❌ No AI Use: This model may not be used for AI training, dataset creation, or any other AI-related purposes under any circumstances.
❌ No Commercial Use Without Permission: This model may not be sold, redistributed, or used for profit (including reselling printed versions) unless a separate commercial license has been obtained from the creator.
Membership
Want to sell these models commercially? Buy a commercial license here!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (773)