Rene Czerner

cover

DSCN0748.png

DSCN0752.png

Zapadka2 v3.png

plate_1.png

2025-04-26_559ce5b1390b.png

0.2mm layer, 6 walls, 25% infill

enzobat83

IMG20250514182407[1].jpg

0.2mm layer, 6 walls, 35% infill

JuSteAmenagement

19634.jpg

19635.jpg

unnamed.jpg

Version faible encombrement 10mm d&#39;épaisseur.Adaptée au système de portes battantes/coulissantes. (cf photo 3).

Compact 10mm thick versionAdapted for swing/sliding door systems (see photo 3)

0.12mm layer, 3 walls, 80% infill

plate_2.png

WizzBang_97

Latch Catch.jpg

Latch Pin.jpg

I used the original file and modified the pin side to allow use with a parallel mounting setup.  This was ideal for my TC Teardrop camper.  The pin side is tilted upward to prevent shear failures and is printed at 100% infill.  PETG for strength and PLA for support interface material.

0.2mm layer, 2 walls, 100% infill on Pin side, 15% on Clasp

Mischkita

tempImage3sLHzg.jpg

tempImagebWwuxb.jpg

I really appreciated this door latch file and used it for some sliding doors on an outdoor shed. Unfortunately, the doors have a lot of play and would pull away to the point where the Pin of the this combo would pull out and the latch was defeated. Figured I would add a disk of sorts to prevent it pulling out. I also saw someone had posted a lengthened version elsewhere. I downloaded that one and the short “original” version here, increased the original one to about 120% length to accommodate the disk and these are working great! I actually printed with a 6mm nozzle but as most people use a 4mm uploading that here. I did not use supports and while not perfect, worked fine. Posting to original creators profile so any prints get credited to them. Thank you!!! If you right click on one of the objects in Bambu studio (don&#39;t think can do this on Handy) I think should be able to split the object back in to “pin” and Disk parts then delete the disk if you want the lengthen pin but no disk.

0.2mm layer, 4 walls, 25% infill

<h2 style="text-align: center">Door Catch</h2><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my project, press BOOST Me. Thank you</boostcontent></boostme>This practical door catch is a perfect solution for easily securing cabinets, doors, or other moving parts of furniture. The design is optimized for easy 3D printing without supports and at the same time offers a sturdy structure. Installation is simple-just screw the catch to the desired location. Thanks to the use of durable material, it is suitable for everyday use in the home, workshop or garage.&nbsp;Features:<ul><li>Simple and functional design</li><li>Mountable with screws</li><li>Compatible with most standard doors and cabinets</li><li>No supports required for printing</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001357994/design/2025-04-26_4903617810f38.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001357994/design/2025-04-26_d5a137cc251b7.png"></figure>

Door Catch

00.jpg

1.jpg

Locking Door Catch – Simplified Version

哆啦A梦

微信图片_20260311113200_1343_241.jpg

微信图片_20260311113153_1339_241.jpg

微信图片_20260311113155_1340_241.jpg

微信图片_20260311113158_1342_241.jpg

Door Catch-M3 Self-tapping screw

ASIA

Print Profile(5)

Description

Door Catch

Comment & Rating (930)

License

Remixes (5)

Related Models