Bosch Indego Rear Drive Wheel BBS RS

Are you a cool dad who just installed your robot lawnmower but there is something missing… You look at your driveway and admire your pristine BMW E30 and then it catches you. You NEED the BBS RS rims on your lawnmower as well.

Bosch Indego lawnmower rear drive wheels, but stylish. Similar to BBS RS design.

Printed in Silk+ for the Rim. Very nice! 

Wheels are TPU 95A. Super squishy! 

Hub is printed in PA6-GF, but PLA is probably fine as well. I had PA6 lying around so seemed like a good place to use.

Print profile is something I used for the Silk+, Normal 0.2mm layer profile probably fine if you use any other material. 

Personally I have XS300 but will probably fit these models too: 

• Indego XS 300 (0.600.8B0.003),
• Indego 350 (0.600.8B0.000),
• Indego S+ 350 (0.600.8B0.100),
• Indego S+ 400 (0.600.8B0.101),
• Indego 400 (0.600.8B0.001),
• Indego S 500 (0.600.8B0.202),
• Indego S+ 500 (0.600.8B0.302),
• Indego M 700 (0.600.8B0.203),
• Indego M+ 700 (0.600.8B0.3003)

Currently requires 3x20mm wood/plastic screws. No glue needed