Arasaku HLR 12X
Print Profile(1)

Description
To create this project, translucent PLA or PET-G is required (recommended). All parts are separated for easy printing.
The rear section offers two options: a complete back or an end cap with threads, allowing access to the electronics if needed.
Printing specifications: (These are recommendations I believe to be optimal)
Layer height 0.16mm
Walls 5 perimeters
Bottom layers 5
Top layers 5
Infill 10% grid
Additional materials needed:
6mm metal inserts
6x10 countersunk screws
Optional electronics: (All links are those I used; they do not need to be exactly the same, this is merely a suggestion)
Acezuk 5000A (Car jump starter battery)
https://www.amazon.es/ACEZUK-Starter-Poratble-Arrancador-Baterias/dp/B0CN91TGQW
Humidifier module
16mm silicone tubing, 1m
I2C LCD1602 module
Military-style flashlight
https://www.amazon.es/dp/B0CMT9JWQ6?ref=ppx_yo2ov_dt_b_fed_asin_title
17cm red 12v LED strip lights
Rechargeable 20mm laser sight
Telescopic sight
Raspberry Pi Pico GPIO extender
Long black straps
Metal D-ring buckle
Metal switch with LED
12v to 5v 5A DC-DC converter
https://www.aliexpress.com/store/3835002?spm=a2g0o.order_list.order_list_main.417.21ef194dQzMlJS
6 LED spotlight
Buzzer
60cm smart animation LED strip
Circular automotive LED voltmeter
60mm glass ball
Multi-point LED focus
Wire connectors
5v - 32v control relays
80 grit mini Dremel sanding bits
50x10mm fan
Raspberry Pi Pico
Montana matte black paint
Montana matte varnish
Montana primer
Montana black undercoat
5v cables
Coroplast adhesive tape




























Comment & Rating (15)