Kingdom Hearts-Inspired Wall Mount for Keyblade - Free 3D Print Model

Search models, users, collections, and posts

Little Shop of RAWRS

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(3)

All

P1S

P1P

H2D Pro

H2S

P2S

H2C

X1 Carbon

X1E

H2D

X2D

A2L

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

2.9 h

2 plates

4.9(28)

With Mounting Holes - 0.2mm layer, 4 walls, 10% infill

2.7 h

2 plates

5.0(1)

Key Hook at 50% size 0.2mm layer, 2 walls, 10% infill

1 h

2 plates

Open in Bambu Studio

Boost

505

1406

534

366

Released

Bill of Materials

Bambu Filaments

Select all

Nebulae (13504) / Filament with spool / 1 kg

PLA Galaxy

Gold (13405) / Filament with spool / 1 kg

PLA Silk+

Description

Boost Me (for free)

Boosts are always appreciated and help fund supplies to create more 3D prints! Thank you, in advance!

Show off your love for Kingdom Hearts with this wall-mountable display piece designed to hold a keyblade prop vertically against a flat surface. The design features a stylized logo inspired by the series, complete with integrated hooks to cradle your keyblade securely while keeping it on display.

This model prints in two separate plates for easy dual-color printing—no AMS required! Just switch filaments between plates. The two pieces are designed to fit together cleanly with a few small dabs of super glue for final assembly.

Mounting is simple: designed for 3M Command Strips or removable tape, so there’s no need to drill into your walls.

Features:

Kingdom Hearts-inspired aesthetic
Holds keyblade props vertically
Easy-to-print two-part design (no multicolor system required)
Wall-mountable with 3M tape—no screws or hardware needed
Prints cleanly on most FDM printers with standard PLA

Perfect for fans and collectors looking to elevate their display setup without damaging walls.

Comment & Rating (52)

@Starsiege

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Added screw holes and uploaded the profile. Also made some chain as mine didn't fit. Here's the link if you want to do the same https://makerworld.com/en/models/2779588-large-ring-for-hype-chain-w-chain#profileId-3088859

The profile uploader has replied

@shoprawrs

This is incredible --> thank you, so much!! This has been on my backlog for a bit now, and you did it! Appreciate you!

@shoprawrs

Also, I really appreciate the chain! Making my son a new one now!!

@Starsiege

Boosted

thanks for the kind words. it was a nice exercise to using a part as a negative and positioning the holes where I wanted them

@user_51248935

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Super cool design 👍

The profile uploader has replied

Show original

@shoprawrs

Thanks for the boost! They look great!

@Magnacarte

Awesome model big dog. Kingdom Hearts just doesn't get enough love! I should have slowed my FLSun T1 a bit so some of the lines wouldn't show, but I really appreciate you for posting this :)

(Edited)

The designer has replied

@shoprawrs

Looks fantastic!!!

@YYann93

Print Profile

0.16mm layer, 2 walls, 15% infill

it’s perfect. thank you!

The profile uploader has replied

@shoprawrs

Mickey!! love it!

(Edited)

@Koltharius

Print Profile

0.16mm layer, 2 walls, 15% infill

printed with a expaned z height to fit the width of my printed keyblade

The profile uploader has replied

@shoprawrs

Looks fantastic! love the color!

@Starsiege

Boosted

Here's the chain I had to make for mine. The keyblade was too big and I would've had to scale considerably. Thought this was a nice touch. If anyone has already printed this and found their keyblade does not fit. You could do this as an option. https://makerworld.com/en/models/2779588-large-ring-for-hype-chain-w-chain#profileId-3088859

@kittykat03

came out grate

@Starsiege

Boosted

added countersunk holes and uploaded the profile. the keyblade I printed is too thick but instead of scaling I'm printing out some chain to hang it off of. when it's done I'll show what I did. model is in my profile

@user_9969510

perfect profile and printed very well.. the only drawback is that the hooks are quite close together and my printed keyblade is a bit too big.. I recommend extending the hooks by one/two centimeters.. otherwise an excellent print

(Edited)

Show original

@Marco21092

Print Profile

0.16mm layer, 2 walls, 15% infill

stampato senza problemi

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Wall Hook with one Mount

PrintManufaktur

22.3 k

8.2 k

IKEA Skadis Wall Mount

AU3D

31.8 k

9.8 k

Guitar Wall Mount

VICLER

22.2 k

5.8 k

Headphone Hanger Wall Mount

Westbound

25.9 k

5.4 k