Pipe and bar clamp stand. Height adjustable
Print Profile(1)
Bill of Materials
Description
The perfect holder for your pipe and bar clamps when you're doing glue ups. No more wobbling or clamps too far down. With these clamp stands your glue ups will go like a dance. Just put your clamps down and set the height you want and they'll stay there.
Boost Me (for free)
If you like the model I would really appreciate it if you gave me a boost
You attach the stands to your workbench with either the included T-track sliders or you can use benchdogs. Of course you can use regular clamps to attach them as well.
Also works great for larger or smaller epoxy pours, such as a river table. Just lay out the form on the stands and adjust the screws so the table is 100% horizontal.
In the print profile there are 3 plates with fixed settings.
Plate 1: The screw and the stand
Plate 2: The nut for the T-track slider. Important! I added a pause for the insertion of the M4 nut.
Plate 3: Nut and sliders
The print profile is set for PLA. Has worked great for me.
If you need some benchdogs to attach your clampstands to your workbench, I have the perfect model for that.
https://makerworld.com/en/models/1302120-benchdog-with-a-twist-o20mm-no-ams#profileId-1334694
Hope you like them and don't forget to boost or give a rating. Really help me putting out more models
If you have any thoughts or ideas for improvement please send me a PM so I can improve if possible.
Happy printing
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)