Hat/Cap Hanger

I have designed a hanger that allows me to hang my caps (snapback) in my closet. This model is a two-piece print that is secured together with 2x M2.5 Machine bolts.

There are 4 different hooks included in this print -

1x Stadium shaped hook (designed for my needs) with an end diameter of 15mm.
1x Cylindrical shaped hook, 25mm Diameter.
1x Cylindrical shaped hook, 20mm Diameter.
1x Cylindrical shaped hook, 15mm Diameter.

I have also created two different bases depending on how you wish to orient your caps when hung.

The Machine bolts and nuts I have used are -

2x M2.5 x 6mm x 0.45p Metric Coarse Stainless A4-70 G316 Socket (T8)
https://www.boltandnut.com.au/machine-screws/cap-head/m2-5-x-0-45p-metric-coarse-stainless-a4-70-g316-socket-t8-machine-screws-iso-14579

2x M2.5 x 0.45p Metric Coarse Stainless A4-70 G316 Hex NYLOC Nuts
https://www.boltandnut.com.au/m2-5-x-0-45p-metric-coarse-g316-stainless-hex-nyloc-nuts

Machine Configuration -

Printer: BambuLab P1S
Plate: Textured PEI Plate
Hot end: 0.4mm hardened steel nozzle.
Filament: Bambu Labs PLA Matte

My Process settings for this print -

0.20mm Standard (Hat Hanger) - Default with the below changes -

Strength-
Wall Loops - 3
Detect Thin Walls - Checked
Sparse Infill Density - 24%

Support-
Enable Support - Checked
Type - Normal(auto)

Others-
Brim type - No-brim