PTFE Quick Disconnect - Free 3D Print Model

Search models, users, collections, and posts

miccode

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

A1 mini

X1 Carbon

X1E

P1P

H2D

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

57 min

3 plates

4.8(9)

Open in Bambu Studio

Boost

172

104

Released

Description

Pure 3d print quick disconnect for PTFE tube

Works with 2.5mm*4mm PTFE tube (bambu default provided tube)

Useful for switching filament, easy to switch to external spool for A1 printer

Pure 3d print, no need for pneumatic connector
Tightly fit PTFE tube
Firm connection
Easy to connect / disconnect
Minimal size

To install PTFE tube

Press the connector to the tube, apply some pressure and rotate the connector at the same time.

If the PTFE tube is too lose, maybe the PTFE tube is worn out, cut 1 cm of the tube and try again

Repeated install/uninstall of a PTFE will worn out the the PTFE tube, try to avoid.

Connect / Disconnect

Once installed PTFE tube on both end

Press the Male/Female connector togather to connect

If the filament have trouble going through the connected tube, try to pass the filament through before connecting

To disconnect, grab both end of the connector, wiggle and pull at the same time

The clamp can break if too much force is used, but the connector should still function even if the clamp is broken off

Other useful stuff

AMS Lite Feeder Connector for PTFE tube

Comment & Rating (11)

@user_3849658508

It worked. ty!

@Tripl3Head

Having a PC4-M6 connector in the Dry Box, it's a bit redundant to use this connector, right

Show original

@Tripl3Head

Print Profile

0.2mm layer, 2 walls, 15% infill

Very well thought-out solution, it prints with the correct tolerances

Show original

@StevieTheMaker

Print Profile

0.2mm layer, 2 walls, 15% infill

Just printed in Bambu Petg… These look great…and for together easily… I have some plans for these…so will add to the post when setup with tubes and tried out…

@user_1207361583

Print Profile

0.2mm layer, 2 walls, 15% infill

@Caporale

Print Profile

0.2mm layer, 2 walls, 15% infill

@UrbanFoxx

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_122046445

Print Profile

0.2mm layer, 2 walls, 15% infill

@1950merc

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:Very delicate easy to brake

@m_jitpanu

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

@user_2858185109

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.