MIP Tool Holder for Skadis

This is a simple box adaptation for the Ikea Skadis pegboard to store my set of MIP tools for my rc cars. I put the website URL on the front of the piece simply as a tip of the cap to what I believe is the best rc wrench company there is. If you want to change the slot designations to accommodate your collection, or change the board slot spacing (mine works best at the current setting of 5.3mm as printed on my P1S using PLA), I've included the .stl file as well as the .3mf file. I do not have the right to either grant myself or anyone else permission to use the MIP website on any copies of this piece that may or may not end up being sold with or without my knowledge. If you're going to be shady, please take the website url off of the piece before doing so. 

Bambu Labs P1S/AMS

Bambu PLA / Bidu PLA HS

.20mm Strength setting

15% Cubic Infill

Tree Organic support

     On Build Plate, Support Critical Regions, and Remove Small Overhangs boxes checked

     Top Z .3 / Bottom Z 1.5

     Support/Object XY Distance 3.5

     Support/Object First Layer Gap 5.0

No issues with support removal at all!

Thanks and enjoy!