Floral Herb Marker Set – Interchangeable Labels

These herb markers are made of two separate parts: a hand-drawn decorative stick and a flat tag with a hole. This way, you can move the tag freely between different plants without removing the stick from the soil.

The tags are designed to be written on, so I recommend keeping Ironing enabled for them. It increases print time slightly, but results in a very smooth surface that’s much easier to write on.

I made this set because I wanted something both practical and a little more fun than a regular label — and being able to change tags or correct the names on them without taking out the stick from soil made daily gardening a bit simpler.

Recommended filament: Bambu PLA Basic – worked well for both stick and tag

Printer I tested on: Bambu Lab P1S
Hotend: 0.4mm Stainless Steel
Print time: ~8 min
Additional tools: not needed

Thanks for printing — hope this makes your herb garden just a bit more enjoyable to care for! 🌱

Check also my other designs:

When done printing please share your opinion and photo, I'd love to know how you liked the model :) Also, if you like 3d printed jigsaws, fidgets and usefull fantasy accesories, take a look at my other projects - I'm sure you'll find something interesting there :)

  .   ˚  .  ✧   .  ˚  .   ✧₊   ˚    .  ✧  .   ˚  .

Newest model: Flowing Fabric That Sounds Like Old TV

  .   ˚  .  ✧   .  ˚  .   ✧₊   ˚    .  ✧  .   ˚  .

About Commercial License

If you would like to sell physical prints of my models, you can do so on my Ko-fi page: