Volume Wheel Haptic Fidget
Print Profile(1)
Description
Hi there!
This is a fidget designed to look and feel like a volume wheel that I had on a electric piano a while back.
Everything including the bearings and magnets were designed to press fit in but you may need glue if your print is a bit loose.
It uses 4mm diameter x 2mm thick magnets like many of my other projects and one 608 skateboard bearing.
If you want it to rotate smoothly, you dont need any magnets.
If you do want some haptoc feedback,
Put the magnets in the base part first making sure they are all facing the same way and then press the bearing over the post in the middle.
Put the clip through the hole on the main body first and then press the top onto it to lock the parts in place.
You can customize the haptic feedback of each click of the wheel by changing how many magnets you put in the main body.
0 magnets will have a smooth motion, 1 will have a faint feedback and the more you add, the more pronounced the feedback will be.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)