Floral Textured Planter

🎯 Recommended Print Settings 

For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8% infill and 2 walls ( you can also go up to 3) which gives plenty of stability while saving on material.

🌿 Tip for Printing:

You can scale this model up without any problem.
But I don’t recommend scaling it down, because some of the thinner areas in the pattern might get lost.

If you still want to scale it down, make sure to reduce the layer height for better detail.

🎨 Customizing Colors or Fuzzy Skin:

In Object Mode, you’ll see two objects.
If you want to change the color or apply a fuzzy skin, select the object named:
👉 “Flower Pattern Outside”

That’s the part with the decorative pattern!

⚡ Speed vs. Quality Trade-off 

While these settings are optimized for a 0.4mm nozzle (the tried-and-true standard), I've gotten fantastic results using a 0.6mm nozzle. Honestly its harder to tell the difference sometime. The larger nozzle significantly cuts down print time and produces surprisingly robust prints. 

Commercial license available for my models through Patreon. 

https://patreon.com/NordicCreativa

Love My Designs? Support My Work with a Coffee ☕