Search models, users, collections, and posts
ATX Power Supply PSU Bench - USB-C Version
Remixed by
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
3.3 h
1 plate
Open in Bambu Studio
Boost
126
342
10
4
148
32
Released
Bill of Materials
List other parts
- DC DC Buck Boost Converter 0-36V 5A/6A 60W/120W x 1: https://www.aliexpress.com/item/1005007330738790.html
- Double Layer Usb Socket x 1: https://www.aliexpress.com/item/1005007512148246.html
- Push Button Switch 10x15mm x 1: https://www.aliexpress.com/item/4001187370402.html
- Banana Socket x 4: https://www.aliexpress.com/item/1005002284599726.html
- Panel Mount Fuse Holder x 5: https://www.aliexpress.com/item/32799694132.html
- DC LED Digital Voltmeter 0-100V x 3: https://www.aliexpress.com/item/4000631852099.html
- Fuse 12A x 5:
- Red LED x 1:
- Green LED x 1:
Description
ATX PSU Bench – USB-C Version
This remix adds a USB-C Power Delivery port (up to 20 V @ 5 A, 100 W) directly to your ATX PSU Bench design. Based on the original MakerWorld model. It retains the standard 3.3 V, 5 V, 12 V and adjustable 0–30 V outputs, now complemented by a USB-A and USB-C outlet module like this one.
Print & Assemble
- Materials: PLA or PETG (PETG recommended for heat resistance).
- Settings: 0.2 mm layer height, 20–30 % infill, supports only around the USB-C cutout.
- Build: Press-fit the USB-C connector, solder VBUS, GND and CC lines to a buck converter module, then secure with M2.5×6 mm screws.
Credits & License
Remix of “ATX Power Supply (PSU) Bench” by MakerWorld (Model 841773)
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (10)