Cheetara Thundercats
Print Profile(1)
Description
Cheetara From The Thundercats.
Fram used in picture is from canadian gamer slim and square. If you like this print or any others please give me a like and a follow and as always boosts are always much appreciated.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#8bd5ee PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #10 (0.88mm) swap to Ice Blue
At layer #11 (0.96mm) swap to Cyan
At layer #13 (1.12mm) swap to Pumpkin Orange
At layer #21 (1.76mm) swap to Red
At layer #22 (1.84mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)