AndreoBTW

cover

1000066818.jpg

plate_1.png

e3ee2ea0-4163-11ef-a139-bfc07e023839.webp

Please consider this as official profile, you will support my work using this profile :)SMALL SIZE PLA PROFILE0,16mm height 12% infill (Gyroid infill)3 walls &nbsp;

SMALL SIZE PLA - 0.16mm layer, 3 walls, 12% infill

2024-01-30_106df57c13fe.webp

Please consider this as official profile, you will support my work using this profile :)HUGE SIZE PLA PROFILE0,16mm height 12% infill (Gyroid infill)3 walls &nbsp;

PLA 160% 0FFICIAL - 0.16mm layer, 3 walls, 12% infill

PLAsse

IMG_20240413_082152_b0991fb6-ea64-4ee4-b81e-09e6dc671409.webp

IMG_20240413_082200_69db6296-f021-4367-827c-7b6454b861c5.webp

When inspecting the original model i noticed some of the most critical areas under the belly and head were not supported very much. Which resulted in my prints sometimes having holes all the way to the infill in those areas (especially when trying to print in finer detail), so i made a few profiles where i did some manual supports in those areas. This profile was the one giving me the best results. so enjoy!

Better support in critical areas 0.12mm lay, 3 Wal, 12% inf.

Stubkjær3D

20240318_051224_0f50b88d-4495-4657-98de-01372d9987bc.webp

0.16mm layer height2 walls12% gyroid infillBrim - yesSupport - yes

110% PLA - for A1 mini

Salad Dressing

PXL_20250609_182421617.MP.jpg

PXL_20250610_132510519~2.jpg

High quality at a larger scale. Improved supports, easy to remove and they allow for smooth printing. &nbsp;This is my first print profile so please leave a comment if you have suggestions!

Size 160%, improved supports, 0.12 layer, 3 wall, 10% infill

Mysak90

IMG_7820.jpg

IMG_7822.jpg

IMG_7819.jpg

40% of original size 0.2mm layer, 2 walls, 15% infill

Atelier BeArt

Scherm­afbeelding 2026-03-30 om 19.51.52.png

Scherm­afbeelding 2026-03-30 om 19.51.59.png

Printed in PETG, so was difficult to find the right settingsMinimal defects at the bottom

Smooth bottom + PETG - 0.1mm layer, 3 walls, 12% infill

Balloon Dog

a model ispired by Jeff Koons dog balloon. Remixed to have a better results and more similar to original one. &nbsp;Please don&#39;t share any other profile than mine. In next times I will add more profiles with different materials, different height ecc..

Print Profile(7)

Description

Comment & Rating (1472)

This remix is based on

License

Remixes (9)

Related Models

Balloon dog - ispired by Jeff Koons REMIX