Search models, users, collections, and posts
Assembled Model Metal Mechanical Unicorn (unicorn) Super Easy Assembly
IP Report
Print Profile(3)
0.2mm single plate
Designer
2.5 h
1 plate
0.16mm single plate
Designer
3.7 h
1 plate
0.16mm layer separation
Designer
3.9 h
2 plates
Open in Bambu Studio
Boost
13
23
0
0
19
6
Released
Description
Content has been automatically translated.
Boost Me (for free)
Assembled Model: Mechanical Unicorn
Due to variations in printers and filaments used, minor tolerances are inevitable
Please, if you encounter any issues during printing or assembly, refrain from giving the designer a low rating; leave a comment or send a private message instead. Designing and creating takes considerable effort, please understand
Assembly is even simpler than the previous Mechanical Scorpion; only a few printed screws are needed
Joint tightness depends on how tightly you screw (it's not recommended to overtighten, as this may cause breakage)
If your printer has poor precision, it's recommended to print with a 0.16mm layer height
If the joints are too loose, applying a small amount of clear nail polish and letting it dry before assembly will solve the problem
Attention!! For the assembly of the four legs, please refer to the image below; I haven't marked them, so be careful not to assemble them incorrectly
Boost Me (for free)
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)