Search models, users, collections, and posts
The Highwaymen - Highwayman Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
2.5 h
1 plate
Open in Bambu Studio
Boost
18
33
0
0
12
3
Released
Description
Project: highwayman.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm
Filaments Used:
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Orange Transmission Distance: 2.7
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Blue Gray
At layer #12 (1.04mm) swap to Orange
At layer #13 (1.12mm) swap to Ice Blue
At layer #17 (1.44mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)