Deepvibes89

imbuto tapparella.pdf

cover

IMG_20250418_205152.jpg

IMG_20250422_175437.jpg

IMG_20250422_175517.jpg

IMG_20250422_175538.jpg

plate_1.png

2025-04-22_473761502bea08.jpg

INTERFACCIA SUPPORTO IN PLA CON AMS LITE&nbsp;altezza layer 0.2/0.164/5 perimetririempimento 25/30%&nbsp;supporti solo dal piano di stampa con distanza XY 0,45mm

PLA SUPPORT INTERFACE WITH AMS LITE Layer height 0.2/0.164/5 perimetersInfill 25/30% Supports only from the print bed with 0.45mm XY distance

0.2mm layer, 6 walls, 25% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

ho creato questo imbuto di ingresso per tapparella che va montato sui profilati d&#39;alluminio e servono come guida per l&#39;ingresso della tapparella&nbsp;l&#39;ho realizzato per un amico che non riusciva a trovare l&#39;oggetto in rete e mi ha detto che calza alla perfezione spero possa servire per altre persone&nbsp;il profilo di stampa è per ams lite , ho stampato tutto in petg tranne l&#39;interfaccia supporto in pla in modo che si staccasse velocemente&nbsp;rilascio anche l&#39;stl in modo che possiate stamparlo anche solo il petg o abs/asa e utilizzando solo i supporti dal piano ma fare attenzione a utilizzare una distanza XY per i supporti di almeno 0,4 mm in modo da non rompere le alette&nbsp;aggiungo un pdf con tutte le quote per confrontarlo con il vostro

I have created this roller shutter inlet funnel designed to be mounted on aluminum profiles, acting as a guide for the roller shutter's entry. I made it for a friend who couldn't find this item online, and they said it fits perfectly. I hope it can help others. The print profile is for AMS lite. I printed everything in PETG except for the PLA support interface, to ensure quick detachment. I'm also releasing the STL file so you can print it using only PETG or ABS/ASA, and utilizing only supports from the bed. Be careful, however, to use an XY support distance of at least 0.4mm, to avoid breaking the fins. I'm adding a PDF with all the measurements for comparison.

Print Profile(1)

Description

Documentation (1)

Comment & Rating (0)

License