Gridfinity Thermal Label Holder 1x3

This holder for thermal labels is on a Gridfinity  base 1x3.
 

UPDATE 2025-09-25 - Added 1x4 and 1x6 Gridfinity size in this model.

UPDATE 2025-05-17 - Added lifters to more easily remove the rolls if you have this amongst other Gridfinity bins. The lifters are on a LEFT and RIGHT plate depending on the side you want them on. They are labeled for 30x15, 30x20, 40x30, 45x20 and blank. Bottom channel is 15mm wide in case you want to put a label in to assign storage locations.

It stores label rolls up to 42mm diameter (the Gridfinity width).  There is 121.5 mm wide inside the holder for multiple rolls.  If you need the holder to be taller, put it on a stacking Gridfinity bin.  The height with labels is 49 mm.

This project started when I purchased a Phomemo M250 (not sponsored) to label my filament swatches.  This should work for any generic label printer with rolls up to 42mm. 

Check out the Gridfinity swatch storage bin (2x3) that has links to the swatches and other info:

or the stackable version:

Enjoy!

You can take a look at my other models here.