Fifth Element Stones - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Hugh Messenger

Art>Sculptures

IP Report

Print Profile(1)

All

P1S

A1 mini

X1E

H2D

P1P

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

7 h

2 plates

4.9(54)

Open in Bambu Studio

Boost

426

1190

834

374

Released

Description

This is a (mild) remix of the awesome models by SJBuilds over on Printables. My wife is a huge Fifth Element fan, and asked me to print her a set of stones. The ones from SJBuilds were the best I could find, but are designed for resin printing.

I have just cut the bottom slightly to be flat to allow them to be printed on an FDM printer (but leaving the original watermark still visible), and scaled them down to the sizes my wife wanted. There are two plates with two different sizes, one is about 3" tall, the other about 4.5" inches. If you want to print them in the film-accurate original size of 11", please go to the original Printables page.

If you print this, please go to the original Printables page and drop the author a like. If the original author uploads here, I'll take this down. I just uploaded it as a convenience for anyone else looking for a quick print on their Bambu Lab.

The pictured prints were done in Eryone Marble PLA (4.5") and Polyterra Limestone PLA (3").

I have applied the standard Creative Commons “Attribution, Noncommercial, Share Alike” license, as per the original.

movie

fifth element

Comment & Rating (73)

@ubrg33k

Print Profile

0.2mm layer, 3 walls, 10% infill

Used fuzzy skin to give it a bit more rougher texture, and it came out great. Loved the movie, and now I have the elemental stones sitting on my shelf. Thanks for creating and sharing!

The profile uploader has replied

@HughMessenger

Just to be clear, as per the main description, I didn't create these. But I'm glad you like them. Maybe drop by the original creator's upload (link above) and give them a like.

@Kiaayo38

I love the texture on these great job!

@Stayling

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

The profile uploader has replied

@HughMessenger

What filament is that? Maybe Polymaker's sandstone?

@Stayling

Boosted

Replying to @HughMessenger :

esun plus

@Stayling

Boosted

Replying to @HughMessenger :

esun+ bones white

@user_2047026316

Print Profile

0.2mm layer, 3 walls, 10% infill

printed some for my brother as a gift, massive 5th element fan! LOVED EM!! thank you!!

The profile uploader has replied

@HughMessenger

You are most welcome! If you have a second, drop by the original creators upload on Printables (linked in the description above) and give them a like.

@bcreative1979

Print Profile

0.2mm layer, 3 walls, 10% infill

love them. printed in wood pla…

@Arniel86

Print Profile

0.2mm layer, 3 walls, 10% infill

fantastic. printed in a rock PLA

@Xzennial_85

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

print quality sublime, 3d printer themselves revolutionary!. Zero issues with optional surroundings!.

@Kokonuts

Print Profile

0.2mm layer, 3 walls, 10% infill

love it!

@josepFruit

Print Profile

0.2mm layer, 3 walls, 10% infill

scaled the print to 150% and the details came out good.

The profile uploader has replied

@HughMessenger

I didn't do any simplification of the model, so afaik it should scale to about 11" without any issues. But as mentioned in the description, please swing by the original creators page and give them a like, and if you want full size maybe download the original models and just slice off the bottom millimeter or so.

@Jabbsy

Print Profile

0.2mm layer, 3 walls, 10% infill

Printed out perfectly, i enlarged it to be as large as i could possibly print on my P2S. Unfortunately I ran out the filament i was using so its 2 different colours, but i have decided to follow it up with some prep-work and a paint job when i get some time.