Female 1/2" UNEF/UNF to Male 1/2 UNF/UNEF 22LR
Print Profile(3)
Description
This has 2 print profiles, pick the right one for you application.
This is an adapter to convert ½-28 (UNEF) to ½-20 (UNF).
This is an adapter to convert ½-20 (UNF) to ½-28 (UNEF).
The center bore is 6mm, cleared for 22LR
It is highly recommend to chase the threads to clean them up. You can print that fine, but you better have your printer and filament dialed in; including your shrinkage.
Print using nylon oor PPS. I use this filament, and recommend it. I also clean it up then follow Polymaker's TDS for annealing.
The print profile is geared for a G10 plate. If you use PEI, add a square to the object and squish it down to .10 tall and twice the diameter. Set the new squished square object as PETG to get the nylon to stick to PEI; it will peal away easily after the print. Makerworld is blocking me from uploading any plate where I set the PETG square for the nylon now. Do not change the orientation, and the inside is arched so no supports are needed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)