AC Milan Giroud HF
Print Profile(1)
Description
Hello everyone, this is the first model I'm sharing.
I'm gradually learning to navigate the world of 3D printing and design.
Any little help, such as a comment, a like, or a boost, means a lot to me, and for that I thank you all.
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm
The Model is 180x101.1mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2.1mm
Filaments Used:
Bambu Lab PLA Basic Black Transmission Distance: 0.6
Bambu Lab PLA Basic Red Transmission Distance: 4
Bambu Lab PLA Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to Jade White for the rest.
For those who wish to use the STL file, remember to set the profile to 0.08
first layer 0.016
wall loops 1
top and bottom shell 1
infill 100%
disable the slow down command in case of overhangs
disable prime tower.
Thank you all again.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)