Pianist :) HueForge
Print Profile(1)
Description
Artwork from Pinterest (autor not found).
Then expanded, newly generated and used HueForge v0.8.1 to create the model.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
The Model is 150x200mm in size
You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct.You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.
These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.
PLA Anycubic Black Transmission Distance: 0
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Orange Transmission Distance: 4.8
PLA Eleg.oo + Gray Transmission Distance: 3
PLA Eleg.oo Basic White Transmission Distance: 7
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Orange
At layer #14 (1.2mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.
Share your print and…
Boost Me (for free)
Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)