IKEA Alex Drawer Labels - Free 3D Print Model

Search models, users, collections, and posts

AtlasboBatlas

Household>Office

IP Report

Print Profile(1)

All

P1P

X1 Carbon

P1S

H2D

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 15% infill

Designer

9.1 h

2 plates

4.3(3)

Open in Bambu Studio

Boost

238

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

Matte Scarlet Red (11200) / Refill / 1kg

PLA Matte

Description

This set of labels is designed to fit the IKEA Alex drawer units. It includes a mix of pre-labeled tags for common items and one blank so you can add your own label by writing directly on it or editing the model file to customize the text.

The model in the images was printed on a Bambu A1 using a 0.4 nozzle with 0.12 layer height settings, in Bambu PLA Matte Red and Matte Black – when you open the file in Bambu Studio, just use “color by layer” for the text, depending on the color you’d like to use.

Boost Me (for free)

I love designing practical things for my own home and sharing them here in case others find them useful too. If this model worked well for you or saved you a bit of time or hassle, feel free to give it a boost. Boosts are a great way to let me know the design was helpful — and they’re a nice bit of encouragement to keep creating and sharing more. Thanks!

The fit is snug enough to stay in place without glue, but if you want a more permanent hold, a small dab of super glue will do the trick. That said, the version pictured has been in use for a few days and is holding up just fine with friction alone.

A simple, neat way to organize your drawers and keep things looking sharp. Let me know if you'd like different labels or a custom version!

Comment & Rating (8)

@user_1499413992

Print Profile

0.12mm layer, 2 walls, 15% infill

(Edited)

Strength Issue:the label slid in well but snapped right away before I got to the drawers

The profile uploader has replied

@user_987296223

Thanks for the heads up, which part snapped? the bracket or the label?

@user_1499413992

the part of the bracket where the label goes in I added a picture in my earlier comment

@Windsor1000

I also had this issue. I just went ahead and snapped it off and super glued the label in place. The label is just too thick for the given dimensions so it will always bend, then break the bracket

@ndom91

Love the look of these, however I don't seem to have enough room between drawers to fit this ~2-3mm extra slide in between each drawer. Did I do something wrong when constructing the drawers? Anyone else seen this? My drawers have at most like 1mm between each

The designer has replied

@user_987296223

There seems to be enough space on my drawers, but i can upload another version with smaller a thinner edge. It might not be thick enough for strength but ill test it out.

@lguard8

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

@user_3348795803

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.