SimHub Seat Belt Roller for TrakRacer Seats - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

blownfg

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

P1P

A1 mini

X1E

P1S

H2D

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 30% infill

Designer

7.4 h

2 plates

5.0(14)

Open in Bambu Studio

Boost

140

185

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

High Performance Bearings

Bambu Filaments

Select all

PLA Basic

Black (31100) / Filament with spool / 1 kg

PETG-CF

PETG HF

List other parts

M4x20mmHexHead x 4: BearingHolder
M8x20mmHexHead x 4: RollerHolder

Description

Remix of captain_pants SimHub Seat Belt roller to suit Trakracer Seat.

This is modeled for the GT fixed seat, unsure if will fit other Trakracer or any other sim seats.

this was remixed with Bambu studio as unable to remix in Fusion, but it works.

Used PLA for the holder and PETG-CF for the Rollers

PETG would be find for all parts

M8 Hex bolts to hold the rollers on, any length will do but longer the better. The inner roller isnt tapped but the bolts screwed in fine.

608zz bearing and M4x20mm for the bearing holder.

Boost Me (for free)

If you like this please boost me and the original maker

sim racing accessories

sim racer

sim racing

Comment & Rating (46)

@user_3966784286

Boosted

Solution adaptable to the Trak Racer Rally seat thanks to the addition of a small wedge between the seat's harness passage and the support. Works perfectly, thank you for this great work!!

@user_2518513220

Hello, did you modify the file? Or can the directly downloaded file support this seat?

@user_3966784286

Boosted

Hi, no modification for me, Just add two wedge printed in PLA on each side to compensate the angle. That’s it.

@user_3966784286

Boosted

Replying to @user_2518513220 :

Hi, You can use directly the file. For more stability when the belt is taut, I have print a small wedge slipped between the part and the seat.

@MANUMD2

Boosted

Super, fits perfectly

(Edited)

The designer has replied

Show original

@blownfg

Great, thanks for the boost

@Marcus_81

Boosted

fits perfectly on the Bimarco Hummer too 👍🏻👍🏻 Many thanks, really great design

The designer has replied

Show original

@blownfg

amazing thanks

@user_3377141704

Boosted

Print Profile

0.2mm layer, 2 walls, 30% infill

Fits perfectly on the Trakracer seat. Do not overtighten the screws for clamping the bearings, otherwise the parts can break

Show original

@eduarprmd

Boosted

Great work from the original designer. Soon followed by your remix. Thank you! Excellent fit on the NRG Prisma.

@user_3964809870

Print Profile

0.2mm layer, 2 walls, 30% infill

Fits pretty good on the NRG-FRP-300B but rollers sit at a slight angle. quality of print is good. didn’t have an issue printing but to clean it up it could use a support at the inner overhangs for the “clips” that hook into the seatbelt holes of the seat.

The profile uploader has replied

@blownfg

On the trak racer seat the rollers are straight so maybe needs a "packer" under one side on your to straighten up. I did print with and without supports on the "clips" and it didnt make much difference so i left it out of the profile. But glad you like it and thanks

@user_3964809870

Replying to @blownfg :

yup it’s not sweat I use belts without a tensioner so it doesn’t effect me in a negative way just wanted to let others know it could work with the seat. and you are correct. it created no issue with printing it was only a minor cosmetic thing without the supports and it’s on the side your back covers when sitting so it’s not a big deal at all. overall awesome file great job and thank you!

(Edited)