Wook-iee's Hueforge
Print Profile(1)
Description
Boost Me (for free)
Boosting this model helps support continued development and new models for the community.
***If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position***
Printing Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.64mm
Filaments Used
PLA BambuLab Basic Black
PLA BambuLab Basic Brown
PLA BambuLab Matte Latte Brown
PLA BambuLab Matte Scarlet Red
PLA BambuLab Basic Yellow
PLA BambuLab Matte Ivory White
Swap Instructions
Start with Black
At 0.72mm swap to Brown
At 0.96mm swap to Latte Brown
At 1.2mm swap to Scarlet Red
At 1.44mm swap to Yellow
At 2.08mm swap to Ivory White for the rest
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)