Flip Top Cigarette Box Kings & 100's (Holds 20) - Free 3D Print Model

Search models, users, collections, and posts

Tools>Organizers

IP Report

Print Profile(2)

All

P1S

H2C

A1 mini

X1 Carbon

P1P

H2S

P2S

H2D

H2D Pro

X1E

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

4.9(69)

100's Cig Box & Lid

Designer

1.8 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

310

698

119

1.1 k

739

Released

Description

Boost Me (for free)

If you like my model and consider it useful, Please consider giving me a Boost!

Made with the “Roll You're Own” community in mind. Designed to fit 20 king sized cigarettes. Perfectly holds an entire pack of cigarettes with a contoured inside while keeping them safe with this truly crush proof, flip top outer shell. The flip top lid snaps securely closed with rounded detents on both sides, and is still easily opened by hand, but not in your pocket or bag. The top is secured to the bottom with a piece of 1.75 filament acting as a hinge, making this entirely made from 3D printing material. This was designed with size in mind to make sure it is no bigger than an average (store bought) cigarette case.

NO EXTRA HARDWARE IS NECESSARY!

I suggest before assembling top to bottom with filament hinge, to run a piece of filament through the printed hinge holes working it back and forth to smooth them with friction. This will help greatly help with assembly! This can be printed with as low as 10% infill successfully. When I printed this with 50% infill, I was able to run it over with my truck and it only had scuffs from pavement.

Comment & Rating (119)

@user_1838789425

I like that they’re blank so you can personal it. Have to position it laying down to prevent filament waste. But came out great! My mum loves wolves, so this is a present for her. I made it a bit longer too because she smokes superkings haha!

@user_990306403

Print Profile

0.2mm layer, 2 walls, 15% infill

used 3Drainvow filament

The profile uploader has replied

@plowrie4

That looks really cool

@user_636822287

Print Profile

0.2mm layer, 2 walls, 15% infill

I made it with petc thank you 🙏

Show original

@user_286218125

I'm struggling to get a smooth first layer. create something like a brim. I really don't know how to solve it. if you can help me🙏

The designer has replied

Show original

@plowrie4

Make sure to calibrate before print

@Papillonnoir

Boosted

I find the print perfect. Really great for king-size sleeves. Thank you very much :-)

Show original

@mikeeri

Any chance you can make one for 100s cigarettes?

The designer has replied

@plowrie4

Just uploaded one for 100's and another for Newports

@mikeeri

Replying to @plowrie4 :

Thanks!!

@plowrie4

soon I will do a plain box for 100 cigarettes

@user_2422037860

how do I find the profile that you added for the 100’s?

The designer has replied

@plowrie4

Right now there is only a 100 box for my Marlboro box. Evidently I uploaded it without putting a picture of my actual model printed so Makersworld took it down. I only uploaded a picture of an example taken from studio. When my printer stops running i will print a 100s box and upload the pictures so I can add the file again. I will send you a message to alert you.

(Edited)

@user_2422037860

Replying to @plowrie4 :

thank you, I appreciate your response.

@plowrie4

I just finished printing a 100's box and added it as a second profile.It is the yellow one pictured, but obviously can be printed in any color.

@Oldowlbear

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@GleiD

the printing comes out really good, the only thing that was different was the size of the hole to put the filament in the lid opening, how do I increase the hole of the part

The designer has replied

Show original

@plowrie4

I've already increased the hole size. It is meant to be very snug so it doesn't come loose. You could try a drill bit carefully.

@GleiD

Replying to @plowrie4 :

thank you, I took a piece of filament and heated it, then I stretched it a bit and it was perfect

Show original

@matiab77

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

The profile uploader has replied

@plowrie4

Is there anything I can help you with or change to improve this model to possibly bring your rating up? Without any explanation of your rating I am not sure what issues you may have had with this model.

(Edited)

@matiab77

Replying to @plowrie4 :

You're right, sorry for not providing more info. One more star for your reply, nice to see. My only suggestion for improvement is to make the holes in the hinge with a slightly bigger diameter, as a 1.75mm filament is quite hard to insert. I think a 0.2mm more tolerance would help. thank you!

(Edited)

@plowrie4

Replying to @matiab77 :

Next chance I get I will reprint to check tolerance. I will either adjust or add 2nd profile with slightly larger hinge holes. I appreciate you giving me this info.

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

AMS Lite Top Mount for A1 & A2L

Bambu Lab

151.2 k

29.6 k

GIF

Flexi Holding Cat (Print-in-place)

3D_Flexseeds (True of true)

58.3 k

18.5 k

Flip Top Cigarette Box (Marl-bro 100's)

282

Box - small and print in place

YogiTech

79.4 k

16.4 k