Rasaka's Venom Fang - Solo Leveling

Rasaka’s Fang Dagger – Solo Leveling ⚔️🐉

A clean, display-ready recreation of Rasaka’s Fang inspired by Solo Leveling, designed as a cosplay prop, display piece, or collectible weapon print.

This model is designed to keep the sharp, aggressive look of the original dagger while still being practical to print, finish, and display. The blade features layered scale-like textures, smooth flowing edges, and a fang-shaped silhouette that catches light really well once printed, especially at finer layer heights.

Modeled with FDM printing in mind so you can get a strong visual result without fighting overly fragile geometry or messy supports.

🎨 Perfect For

✅ Solo Leveling fans
✅ Sung Jin-Woo cosplay builds
✅ Dagger / weapon prop displays
✅ Desk or shelf display pieces
✅ Painted prop kits
✅ Anime-inspired collectibles
✅ Fantasy weapon collections

🔧 Print Notes

✓ Optimized profiles included for CoreXY and A1 series printers
✓ Designed for clean FDM printing
✓ Print orientation is already set in the profile
✓ Slowing outer walls can help improve the blade surface and scale texture
✓ Finer layer heights will bring out more of the fang and scale detail
✓ Works great in single color, metallic filament, silk filament, or painted finishes
✓ Balanced for display or cosplay use

🧼 Before Printing

Please clean your build plate before starting the print. A dirty or oily plate can cause lifting, warping, or poor bed adhesion, especially on long weapon parts or narrow contact areas.

Recommended prep:

✓ Wash the plate with dish soap and warm water, then dry fully
✓ Avoid touching the print surface after cleaning
✓ Use glue stick or liquid glue if your plate normally has adhesion issues
✓ Add a brim if you notice edge lifting or instability
✓ Watch the first layer to make sure it is sticking evenly before walking away

📏 Scaling

Scale up or down depending on your display, cosplay, or prop needs.

If scaling smaller, some of the blade texture and finer edge details may become less visible. If scaling larger for cosplay, make sure to check fit, strength, and print orientation before printing the final version.

⚠️ Printer Compatibility

Optimized profiles are included for both CoreXY and A1 series printers.

You should be able to print this without major tweaks, but slower outer walls and a stable first layer will give the best surface quality.

🌙 More Anime / Cosplay Prints

If you like this print, check out my other models and collections below:

Solo Leveling / Anime / Cosplay Prints:

I’ll be adding more Solo Leveling models, anime-inspired props, cosplay accessories, Elden Ring prints, Zelda props, and collectible display pieces regularly.

If that sounds like your kind of stuff, a follow would help a ton and you’ll see new models as they go live 🙌

If you print this, I’d really love to see how it turns out. Feel free to share your photos, painted versions, cosplay builds, or display setups 👀