Reading Goal Tower and Mini Books -Books- 6 Sizes

03.05.2025 → 250-book reading goal tower and 300-book reading goal tower added

19.07.2025 → 2nd print profile added, specifically for the “A1 mini” (not all towers available in this version. Only 50-book, 100-book, 150-book, and 200-book reading goal towers available in this print profile!)

Reading Goal Tower -Books-

Create mini-books as a reminder of your reading adventures

Make your read books visible with a reading goal tower in 6 different sizes!
Each mini-book represents a real book you've read, growing piece by piece into your very own reading monument

Why you'll love it:
– Visual motivation for your reading goals
– Perfect for book lovers, bullet journal fans, and avid readers
– A charming reminder of every single book

This tower doesn't have to be just for books; for example, you can also visually represent and remember your audiobooks

There are 6 different sizes to choose from: 50-book tower, 100-book tower, 150-book tower, 200-book tower, 250-book tower, and 300-book tower

• Plate 1 → 1x Mini-book (can also be duplicated)
• Plate 2 → 50-book Reading Goal Tower -Books-
• Plate 3 → 100-book Reading Goal Tower -Books-
• Plate 4 → 150-book Reading Goal Tower -Books-
• Plate 5 → 200-book Reading Goal Tower -Books-
• Plate 6 → 250-book Reading Goal Tower -Books-
• Plate 7 → 300-book Reading Goal Tower -Books-

To print your book covers and adhere them to the mini-books, I would recommend self-adhesive A4 label paper

I use this label paper: Link Amazon

Dimensions for printing a cover for the mini-book: Width 42.2mm x Height 27.8mm

(Cover consisting of front, back, and spine)

Notes on printing and file:

1. the height of the towers is designed such that one should check or pay attention to the thickness of the paper for adhesion
2. the mini-book is 3mm thick, and due to the height of the towers, I have accounted for a 0.3mm tolerance, so the paper/label can be a maximum of 0.15mm thick! So that the front + mini-book + back is a maximum of 3.3mm thick!
3. Please pay attention to this, otherwise 50 mini-books will not fit in one tower segment
4. for printing, due to the long overhang, I chose a layer height of 0.16mm and this should be adopted
5. Speeds are adjusted
6. Print lying flat!
7. I have added a modifier to each tower. This only smoothes the surface of the letters!
8. If you don't want smoothing, you can remove the modifier. However, I find it looks better when the letters are smoothed :)
9. Note: I printed it with 3 walls and 10% infill; if you want fewer walls, for example 2 walls, you will have to check yourself if it looks good and works with 2 walls

Further versions of my reading goal towers:

• Reading Goal Tower - 2025 - (Horizontal)
• Reading Goal Tower - 2025 Vertical -
• Reading Goal Tower -Sub- (also -SuB- with capital “B” + TBR "To Be Read" Version)
• Reading Goal Tower - Book -

I hope you have a lot of fun with it

For suggestions or anything else, just leave a comment :)