FlySky Noble NB4 Transmitter Screen Protector
Print Profile(1)
Bill of Materials
Description
Protect the screen assembly on your FlySky Noble NB4 transmitter with this print. Just slide the main part on and the attach the rear panel with two M3x8 screws. I have designed for fairly precise fit but left a little wiggle room to hopefully avoid issues with different printer tolerances.
I recommend using PETG or some other filament with higher heat tolerance than PLA, especially if you will use the transmitter outdoors. I used PETG from Duramic for the one in the photos, but I have also printed successfully with Bambu PETG-HF. If you do use PETG, it can be tricky with overhangs which this print has, so if you have a P or X series printer I recommend running the aux fan at 70% for this to get better quality.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)